Products

Double end lock nut socket driver. O.D. 34.2mm. I.D. 26.3mm. 4 Pins, pin width 5.6mm. O.D. 19.8mm. I.D. 14mm. 4 pins, pin width 3.7mm.

Drum and clutch basket holding tool - all Ducati 6 speed gear box '88-15

DS A114-32 – Cylinder head wrench – Removal and installation of the cylinder head. 15mm, 12pt. Compatible with 748, 749, 916, 996, 998, 999, Mons...

Economy valve spring compressor.  5 collet adaptors, 2 threads.  Max depth 100mm in hard case.  

Engine crankcase separating tool - heavy duty

Engine lock nut socket driver - CBR 1000 R / RR O.D. 27mm. I.D. 20.1mm. 4 Pins. Pin width 5.6mm.  

Engine mounting lock nut driver.  O.D. 27mm. I.D. 20mm. 4 Pins, pin width 4.6mm.

Special ratchet wrench for HD Dyna exhaust bracket

Purpose designed exhaust flange nut driver for Ducati bevel drive twins and singles. The specially shaped multi tooth profile helps engage the exh...

Face pin set.  Adjustable. Heavy duty.  Pin sizes: 2.5, 3.0, 4.0, 5.0

Flat spanner 30 - 32 mm.  12 point. Confused by 12-point nuts? A 12-point nut is simply two hexagons overlaid at 30° to each other. The size is me...

DS A 137-55 – Flywheel extractor – Uses ½” square drive or 24mm and 41mm wrench. Thread pitch M55 x 1.50. Compatible with 1199, 1299 Panigale. Equi...

Compatible with most Ducati models from 2001 – Current EXCEPT Panigale range. Equivalent to Ducati P/N 88713.2036, 88713.2101, 88713.3367

Flywheel holder

O.D. 48 mm, 58 mm long.  Inside thread M36 x P1.5.  Female thread.

Foldable silicon funnel

Folding chain breaker for chain pin sizes 530, 428 & 420.  

Fork air pump with gauge. Fits Schrader valves (also called American valve). Up to 60 psi / 4 bar

Fork bleeding tool.  10, 12, 14. Damper rod recovery

Fork cap driver deisgned for FGRT series Ohlins forks. 1/2" SQUARE / 27mm HEX DRIVE 4 pins Ø38mm PCD with protection o-rings Material anodized al...

Fork cap driver designed for OEM series Ohlins forks as found on Ducati Panigale 1199S and Yamaha R1 2015. 3/8" square / 24 mm hex drive 4 pins on...

Fork cap driver designed for older FG series Ohlins forks.  This tool will not fit newer FGRT forks and cartridge kits. 3/8" square / 24 mm hex dr...

Fork cap spanner for KTM - 50 mm

A3589 - Fork cap wrench.  49 mm 'KYB' - Honda / Yamaha / Kawasaki 4 stroke MX A3588 - Fork cap wrench.  50 mm 'Showa' - Honda / Kawasaki / Suzuki ...