Products

Spoke wheel weight balls - 25 grm and 40 grm

Spring puller.  Long shank.  20 cm

Spring hook small

Super strong spring hook.  150mm long.

Includes one new ring nut. Compatible with Twin Bevel drive engines

Starter pulley extractor tool for Honda 50/100/110 models

Steering head lower race installer

Steering head lower race installer - radial

Steering lock nut socket driver. O.D. 43.9mm. I.D. 37mm. 6 Pins, pin width 6mm.

Steering stem lock nut driver. O.D. 43.8mm. I.D. 36.4mm. 6 Pins, pin width 5.2mm.

Steering stem lock nut driver. O.D. 50.7mm. I.D. 38.5mm. 6 Pins, pin width 9.1mm.

Steering stem lock nut socket driver - Arfica Twin O.D. 41.9mm. I.D. 36.4mm. 4 Pins. Pin width 5.2mm.

Steering stem lock nut socket driver - GSXR1000\ O.D. 42mm. I.D. 36.2mm. 4 Pins, pin width 4.5mm.

Steering stem nut wrench - KTM.  39 mm and 53 mm

Ducati steering stem socket

Stud remove/install set - 6 x 1 / 8 x 1.25 / 10 x 1.25 / 10 x 1.50

Suspension Sag Measurement Kit

Swing arm nut driver tool for Kawasaki ZX6RR '05, ZXKR '05-10, ZX10R '04-10, GTR 1400 '08-10, ZZR 1400 '06-10, Z1000 '10 plus more    

Swingarm adjuster driver set

A4218 - Swingarm nut socket. O.D. 43.1mm. I.D. 30.3mm. 4 Pins, pin width 4.8mm. A7282 - Swingarm lock nut socket driver - DL 1000 O.D. 43mm. I....

- All British twins - Three nut sizes 3/16", 7/32", 1/4" - One main dirver bar 7/16"

6 pce tappet adjustment driver set.  Socket size: 8, 9, and 10 mm with handle.  Tappet adj: square 3 and 4 mm, and slot bit driver.  Sutiable for m...

Holds camshaft sprocket when removing timing nuts. Verify camshaft sprocket diameter. I.D. 60mm O.D. 71mm - 20 tooth Ducati Monster '04-08/'10, M...

Timing disc.  Ø 170 mm